Features:
1. Latest LED technology
2. Low heat output
3. Easy operating with LCD Display
4. Three preset programs-Fast: Full power output, Pulse: 0.5 intermittent output, Ramp: Soft start
5. Timer: Five preset curing time from 5, 10, 20, 30, and 40 seconds
6. Low battery signal
7. Sleeping mode - If the curing light is unused for a period of 3 minutes the curing light will convert to "Sleep mode" to conserve the battery
8. Auto memory - The curing light will remain in previous settings, including the curing time and the curing program
9. Cord/Cordless interchangeable - The curing light may be operated directly using AC power supply connected to the base of the handpiece. This will allow users to operate the curing light while simultaneously charging the battery
10. Build-in LCD radiometer - User can monitor LED output by reading the radiometer which is located on the charging base
Range of Light (in nm)
|
430-490nm
|
Light Intensity at the Tip (mW/cm2)
|
1400mW
|
Battery Life
|
200 cycles at STANDARD mode, 10 seconds per cycle;
135 cycles at STANDARD mode, 20 seconds per cycle
|
Charging Time to Complete
|
5 Hours
|
Battery Type
|
Lithiumm Ion
|
Gradle Battery
|
Rechargeable
|
Operating Temperature
|
15~30°C (60-86°F); Unit turns off automatically when the temperature at the wand tip reaches 48°C
|
Power Input, Curing Light
|
5VDC @2.4A
|
Power Input, Power Supply
|
100-240VAC @ 50-60Hz
|
Pulse Rate
|
10Hz
|
Pulse Duty Cycle
|
50%
|







